Dimethyldodecylamine n oxide-manufacture,factory,supplier from China

(Total 24 Products for Dimethyldodecylamine n oxide)
Products Description of N,N-Dimethyldodecylamine CAS#112-18-5Colorless liquid. Melting point -20℃, boiling point 247℃, 110-112℃ (0.4kPa), relative density 0.775, refractive index 1.4375.
지금 연락하세요
Products Description of 4-Methylmorpholine N-oxide CAS#7529-22-8N-methylmorpholine oxide (NMMO) solvent is a special excellent solvent with extremely strong solubility for cellulose. It is a crystalline solid or liquid at room temperature, non-toxic, weakly alkaline, and highly hygroscopic. Each molecule can combine with multiple water molecules. It is easy to produce a color change reaction at 120°C, and an overheating reaction at 175°C and is easy to gasify and decompose.
지금 연락하세요
Products Description of Magnesium oxide CAS#1309-48-4Magnesium oxide is commonly known as magnesia, also known as magnesium oxide. It is a typical alkaline earth metal oxide with the chemical formula MgO. It is a white powder with a melting point of 2852℃, a boiling point of 3600℃ and a relative density of 3.58 (25℃). It is soluble in acid and ammonium salt solutions. It reacts slowly with water to form magnesium hydroxide. It can be dissolved in a carbon dioxide aqueous solution to form magnesium bicarbonate.
지금 연락하세요
Products Description of Cadmium oxide CAS#1306-19-0Cadmium oxide is an oxide of cadmium with the molecular formula CdO, which is carcinogenic. Cadmium oxide can dissolve in acid to form Cd[H2O]62+; it can also dissolve in alkali to form [Cd(OH)4]2??.Cadmium oxide Chemical PropertiesMelting point 900°CBoiling point 1385 °Cdensity 8.15 g/mL at 25 °C(lit.)storage temp. Store below +30°C.solubility 0.0021g/lform powdercolor brownSpecific Gravity8.15OdorOdorlessPH9-10 (H2O)(aqueous suspension)Water Solubility insoluble.
지금 연락하세요
Products Description of Direct Ferric oxide CAS# 1309-37-1Iron oxides are produced synthetically and consist essentially of anhydrous and/or hydrated iron oxides. The range of hues includesyellows, reds, browns and blacks. Food quality iron oxides are primarily distinguished from technical grades by the comparatively low levels of contamination by other metals. This is achieved by the selection and control of the source of iron and/or by the extent of chemical purification during the manufacturing process.
지금 연락하세요
Aluminum Oxide CAS#1344-28-1 The oxide of aluminum is Al2O3. The natural crystalline mineral is called corundum, but the synthetic crystals used for abrasives are designated usually as aluminum oxide or marketed under trade names. For other uses and as a powder, it is generally called alumina.
지금 연락하세요
Products Description of Cupric oxide CAS#1317-38-0Copper oxide is an inorganic substance with the chemical formula CuO. It is a black oxide of copper, slightly amphoteric and slightly hygroscopic. Insoluble in water, easily soluble in acid, stable to heat, and decomposes into oxygen at high temperatures. It can be reduced to metallic copper by introducing hydrogen or carbon monoxide at high temperature. Copper oxide is heated in Chemicalbook air and releases oxygen at about 1050°C and is reduced to cuprous oxide.
지금 연락하세요
Products Description of Lead Oxide CAS#1317-36-8Lead oxide is an inorganic substance with the chemical formula PbO. It is a yellow crystalline powder. It is insoluble in water and ethanol, but soluble in nitric acid, acetic acid, and hot alkali solution. It is mainly used as a pigment, metallurgical flux, paint drier, rubber vulcanization accelerator, pesticide, etc.On October 27, 2017, the World Health Organization's International Agency for Research on Cancer published a preliminary list of carcinogens for reference.
지금 연락하세요
Products Description of Cupric oxide CAS#20427-59-2Chemical formula Cu(OH)2. Molecular weight 97.56. Blue to blue-green gel or light blue crystalline powder, toxic. Relative density 3.37. Color darkens at 60-80℃. Insoluble in cold water, decomposes into copper oxide in hot water, dissolves in acid to form divalent copper salt, dissolves in excess concentrated alkali to form tetrahydroxy cuprate, dissolves in concentrated ammonia or potassium cyanide solution to form dark blue tetraamminecopper(II) dihydroxide solution or colorless potassium tetracyanocuprate(II) solution.
지금 연락하세요
Products Description of N,N'-Dimethylpiperazine CAS#106-58-1N,N'-dimethylpiperazine is a flammable liquid that is more flammable when exposed to open flames, high temperatures, and oxidants; combustion produces toxic nitrogen oxide fumesN,N'-Dimethylpiperazine Chemical PropertiesMelting point -1 °CBoiling point 131-132 °C750 mm Hg(lit.)density 0.844 g/mL at 25 °C(lit.)vapor pressure 20 hPa (20 °C)refractive index n20/D 1.4463(lit.)Fp 65 °Fstorage temp. Store below +30°C.solubility miscibleform Liqu
지금 연락하세요
Products Description of Chromium(VI) oxide CAS#1333-82-0Chromium trioxide is an inorganic compound with the chemical formula CrO3. It is a dark red or dark purple crystalline powder. It is soluble in water, sulfuric acid, nitric acid, ethanol, ether, acetic acid, and acetone. It is mainly used in electroplating industry, pharmaceutical industry, printing industry, tanning and fabric mordant dyeing.On October 27, 2017, the World Health Organization's International Agency for Research on Cancer published a preliminary list of carcinogens for reference.
지금 연락하세요
Products Description of 2-Chloropyridine-N-oxideCAS#2402-95-12-Chloropyridine-N-oxide is an important compound in pyridine nitrogen oxides. It is an important intermediate for pesticides, medicines and daily chemical products. It is also an important intermediate for the synthesis of skin cleansers, shampoos and pyrithione and other antiseptic and antifungal fungicides. It is an essential raw material for the synthesis of 2-chloro-4-nitropyridine, an important intermediate for the synthesis of phenylurea plant growth regulators.
지금 연락하세요
Products Description of Methylcyclopentadienyl manganese tricarbonyl CAS#12108-13-3Methylcyclopentadienyl manganese tricarbonyl, a metallic manganese compound. Combustible, highly toxic, decomposes into toxic manganese oxide fumes in fires.
지금 연락하세요
Products Description of Lantanium Nitrate CAS#10277-43-7Lanthanum nitrate hexahydrate is a colorless crystalline solid with a distinctive nitrate odor. - It is relatively stable at room temperature, but can decompose when heated to produce toxic nitrous oxide gas.
지금 연락하세요
Products Description of 2,2,6,6-Tetramethylpiperidinooxy CAS#2564-83-22,2,6,6-Tetramethylpiperidinyl oxide, abbreviated as TEMPO, is a piperidine-type nitrogen oxide free radical. TEMPO is an orange-red, easily sublimable crystal or liquid, and is easily soluble in solvents such as water, ethanol, and benzene.
지금 연락하세요
Products Description of Bismuth trioxide CAS#1304-76-3Yellow monoclinic crystals. Soluble in acid, insoluble in water and alkali. Can be reduced by carbon and hydrogen. Made by heating and decomposing bismuth nitrate. Used to make metallic bismuth, catalysts and bismuth oxide superconductors.Bismuth oxide is also known as "bismuth trioxide". Pure products include α-type, β-type and δ-type. α-type is yellow monoclinic crystal with a relative density of 8.9 and a melting point of 825℃. It is soluble in acid but insoluble in water and alkali.
지금 연락하세요
Products Description of DDAO CAS#2605-79-0N,N-Dimethyldecyl-N-amine oxide is an organic compound with a chemical formula of C12H27NO and a molecular weight of 201.35.DDAO Chemical PropertiesMelting point 70 - 73°Cdensity 0.996 g/mL at 20 °Cvapor pressure 0Pa at 25℃refractive index n20/D 1.337storage temp. 2-8°Csolubility Chloroform (Slightly), Methanol (Slightly)form Solidpka4.79±0.40(Predicted)color White to Off-WhiteWater Solubility 409.5g/L at 30℃BRN 2352550InChIKeyZRKZFNZPJKEWPC-UHFFFAOYSA-NLogP0.95 at 20℃CAS DataBa
지금 연락하세요
4,4'-Methylenebis(N,N-diglycidylaniline) Chemical PropertiesBoiling point 619.3±35.0 °C(Predicted)density 1.15 g/mL at 25 °C(lit.)vapor pressure 0Pa at 24.85℃refractive index n20/D 1.601(lit.)Fp >230 °Fform clear liquidpka4.58±0.50(Predicted)color Light yellow to BrownWater Solubility 9.2mg/L at 20℃LogP2.12 at 22℃EPA Substance Registry SystemOxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Safety InformationHazard Codes Xi,NRisk Statements 43-51/53Safety Statements 
지금 연락하세요
Products Description of N,N'-Ethylenebis(stearamide) CAS#110-30-5N,N'-(ethane-1,2-diyl)distearamide is a colorless to light yellow waxy solid. It has good thermal stability and low volatility.
지금 연락하세요
Products Description of N,N'-Carbonyldiimidazole CAS#530-62-1N,N′-Carbonyldiimidazole (CDI for short) is a derivative of imidazole. Its imidazole structure has a closed large P bond, and one of the nitrogen atoms has a lone pair of electrons in the unbonded sp2 orbital. These determine that CDI has strong chemical reactivity and can react with functional groups such as ammonia, alcohol, and acid to synthesize many compounds that are difficult to obtain by general chemical methods.
지금 연락하세요
Products Description of Direct Pigment Yellow 42 CAS#51274-00-1Pigment yellow 42, also known as Yellow Iron oxide is a yellow powder in the form of an alkaline oxide with comparatively stable chemical properties. It is is insoluble in water and alcohol, slightly soluble in acids but completely dissolves in concentrated hydrochloric acid. When heated to 80℃, it loses water and converts to red ferric oxide. It is used in coating, printing ink and paint, and also as a coloring agent for building material, rubber and paper-making.
지금 연락하세요
Products Description of N,N-Dimethylaniline CAS#121-69-7N,N-Dimethylaniline (CAS#121-69-7) is an organic compound that presents as a yellow, oily liquid with an amine-like odor. It is characterized by its density of approximately 0.96 g/cm³, a boiling point of 193.5±0.0 °C at 760 mmHg, and a melting point in the range of 1.5-2.5 °C (literature value) .
지금 연락하세요
Products Description of N-Methylformamide CAS#123-39-7Pure N-methylformamide is a colorless, transparent, viscous liquid with m.p.-3.8℃, b.p.198℃, n25D 1.4310, relative density 0.9986 (25℃). It is soluble in water and inorganic salts.
지금 연락하세요
Products Description of N,N-Diethyl-m-toluamide CAS#134-62-3DEET (diethylmethylbenzamide), also known as DEET, is a broad-spectrum insect repellent that repels a variety of biting insects in various environments, including stinging flies, midges, black flies, chiggers, deer flies, fleas, gnats, horse flies, mosquitoes, sand flies, small flies, stable flies and ticks. DEET was developed and patented by the U.S. Department of Agriculture during World War II. The product was designated as a mosquito repellent for use by the U.S. military in 1946.
지금 연락하세요
Relate News
39771-34-1 Introduction4-Amino-2,6-dibromopyridine (CAS#39771-34-1) is a chemical compound that belongs to the pyridine family. It is a pale yellow crystalline solid that is soluble in water and organic solvents. This compound is widely used in the pharmaceutical and agrochemical industries due to its diverse biological activities.
Dextran refers to a homopolysaccharide composed of glucose as a monosaccharide. The difference in the length of the dextran chain determines its different medicinal value. Long-chain dextran is usually a blood volume expansion drug with a molecular weight of tens of thousands to hundreds of thousands; while short-chain dextran can be complexed with ferric hydroxide , made of iron dextran, that is, iron dextran.What is Dextran?Dextran is a high-molecular glucose polymer synthesized from sucrose catalyzed by dextran sucrase (dextransucrase EC2.4.1.5) produced by Leuconostocmesenteroides.
Glycerin: A Versatile Compound with Numerous ApplicationsGlycerin, also known as glycerol, is a simple polyol compound with a sweet taste and syrupy texture. It is widely used in various industries, including cosmetics, pharmaceuticals, and food. Due to its unique properties, such as being hygroscopic (attracting water) and non-toxic, glycerin has become an indispensable ingredient in many products.Glycerin in CosmeticsMoisturizer: Glycerin is one of the most effective humectants, drawing moisture from the air and into the skin.
Calcium chloride, CAS#10043-52-4, as a common chemical substance, plays an indispensable role in numerous industries due to its unique physical and chemical properties.In the road construction and maintenance industry, Calcium chloride, CAS#10043-52-4 is the "guardian" of winter road safety. In winter, in the northern regions of the United States, Calcium chloride, CAS#10043-52-4 is often used as a de-icing agent. It is spread on the roads to quickly melt the snow and prevent ice formation, ensuring traffic safety.
Introduction of Capsaicin PepperThe spicy ingredients contained in pepper fruit are capsaicin pepperoids, including: capsaicin pepper, dihydrocapsaicin pepper, nordihydrocapsaicin pepper, homocapsaicin pepper, homodihydrocapsaicin pepper I, homodihydrocapsaicin pepper II, Nonoyl vanillylamide, Decoyl vanillylamide, Capryl vanillylamide. Capsanthin includes Cryptoxanthin, Capsanthin, Capsorubin, Carotene; also contains vitamin C, citric acid, tartaric acid, malic acid, protein, minerals, etc. .
Urotropine, also known as hexamethylenetetramine, is a polycyclic heterocyclic compound with similar structure to adamantane, and the molecular formula is c6h12n4. Urotropine is a white crystal, which can be prepared by the reaction of formaldehyde and ammonia. The molecule contains four mutually fused triazane rings. It is limited soluble in water and easily soluble in most organic solvents.Urotropine is widely used. It can be used as raw materials for organic synthesis, analytical chemical reagents, antibiotics and fuels, and also has many uses in chemical production.
Potassium carbonate (K2CO3), as a common inorganic compound, has been widely studied and utilized since ancient times due to its unique chemical properties and versatile applications. From its natural formation to its myriad uses in modern industry, the story of potassium carbonate mirrors the progress of chemistry and the advancement of human civilization.Through the exploration of potassium carbonate, we can gain a better understanding of the substance itself and discern the multifaceted role of chemicals in modern society.
Industrialization of TrehaloseTrehalose is a stable non-reducing disaccharide consisting of two glucose molecules with an α, α, 1, 1-glycosidic bond. Trehalose was originally extracted from the ergot fungus of rye and was subsequently found to be widespread in natural flora, fauna and microorganisms, especially in fungi, algae, mosses and invertebrates. Trehalose is white crystal, a molecule of trehalose contains two molecules of crystal water, soluble in water, glacial acetic acid and hot ethanol, insoluble in ether, acetone.
Latest Developments in Acetic Acid ProductionRecent advancements in the production of acetic acid highlight a significant shift towards more sustainable and innovative methods. Acetic acid, an essential organic compound, is increasingly produced through biotechnological processes and carbon dioxide (CO2) conversion, reflecting the industry's commitment to sustainability.Bioproduction Innovations: The biological production of acetic acid is gaining traction as a sustainable alternative. Techniques such as genetic engineering are being utilized to enhance yields and reduce production costs.
The sugar that people often eat in daily life is extracted from sugarcane, sugar beet and other plants. There are also some substances in the plant kingdom that are sweeter than sucrose. Stevia, native to South America, is 200 to 300 times sweeter than sucrose; the West African bamboo skewers in the tropical forests of Africa are 3000 times sweeter than sucrose; there is also a vine plant of Dioscorea nigra with the sweetness of the fruit. 90,000 times that of sucrose.However, these substances, which are thousands of times sweeter than sucrose, are rarely seen.
x

성공적으로 제출되었습니다

최대한 빨리 연락드리겠습니다.

닫다