Irganox 1010-manufacture,factory,supplier from China

(Total 24 Products for Irganox 1010)
Products Description of Antioxidant 1010 CAS#6683-19-8Antioxidant 1010 is a macromolecular multifunctional hindered phenol antioxidant, soluble in benzene, acetone, chloroform, insoluble in water. It is non-polluting, non-coloring, low in volatility, and has good extraction resistance.It is widely used in polyethylene, polypropylene, polyoxymethylene, ABS resin, PS resin, PVC, engineering plastics, rubber and petroleum products, and has excellent antioxidant properties for polypropylene and polyethylene. It can effectively extend the service life of the product.1.
지금 연락하세요
Products Description of 2,4,5-Trimethoxybenzaldehyde CAS#4460-86-02,4,5-Trimethoxybenzaldehyde is mainly used to prepare asarone. α-Asarone is mainly found in the volatile oils of natural products such as Acorus calamus. It has sedative, prolonged hypnotic and antibacterial effects. It is clinically used to treat mental illnesses such as chronic bronchitis, epilepsy, and coma.
지금 연락하세요
Products Description of Copper(II) sulfate CAS#7758-98-7 Copper sulfate is an inorganic compound. The inorganic industry uses it to make other copper salts such as cuprous chloride, cupric chloride, copper pyrophosphate, cuprous oxide, copper acetate, copper carbonate, etc. The common form of copper sulfate is crystals. Anhydrous copper sulfate is a white crystalline powder, which may also be light gray-green due to impurities. It is a soluble copper salt. The relative density is 3.603, and the solubility in water at 25°C is 23.05g.
지금 연락하세요
Products Description of Diphenylacetonitrile CAS#86-29-3The molecular formula of diphenyl acetonitrile is C14H11N, and its melting point is 71-73°C. Boiling point 181 °C (12 mmHg). Flash point 120 °C. WATER SOLUBLE INSOLUBLE. Used as intermediates in organic synthesis.
지금 연락하세요
Products Description of Carbon Black CAS#1333-86-4Carbon black is a finely divided form of carbon. It may ignite explosively if suspended in air in the presence of an ignition source or slowly undergo spontaneous combustion upon contact with water.In addition, it is toxic by inhalation, with a TLV of 3.5 mg/m3 in air. Primary uses are in the manufacture of tires, belt covers, plastics, carbon paper, colorant for printing inks, and as a solar-energy absorber.1.  It is edible black pigment.
지금 연락하세요
Products Description of Disodium sulfide CAS#1313-82-2Sodium sulfide, also known as stinky alkali, stinky soda, or sulfide alkali, is an inorganic compound with the chemical formula Na2S.
지금 연락하세요
Products Description of Sodium Sulfide CAS#1313-82-2 Sodium sulfide is also known as alkali sulfide, stinking soda, and stinking alkali. The pure product is colorless or slightly purple prismatic crystals at room temperature. Industrial sodium sulfide is often pink, brownish red, or khaki blocks due to impurities. It has the smell of rotten eggs, is corrosive, and toxic. The density is 2.427. It decomposes at 920°C. It is soluble in cold water and easily soluble in hot water.
지금 연락하세요
Products Description of Pyridine hydrobromide CAS#18820-82-1Pyridine hydrobromide is used as an intermediate for cephalosporin antibiotics such as ceftriaxone, cefapirin, and ceftazidime.Pyridine hydrobromide Chemical PropertiesMelting point 200 °C (dec.)(lit.)storage temp. Inert atmosphere,Room Temperatureform powder to crystalcolor White to Light yellow to Light orangeWater Solubility Soluble in water.Sensitive HygroscopicBRN 3615336InChIInChI=1S/C5H5N.BrH/c1-2-4-6-5-3-1;/h1-5H;1HInChIKeyBBFCIBZLAVOLCF-UHFFFAOYSA-NSMILESC1C=CN=CC=1.BrCAS DataBase
지금 연락하세요
Products Description of Sulfide Sodium CAS#1313-82-2When sodium polysulfide impurities are present, the sodium sulfide will show different degrees of color changes due to the influence of factors such as the length of the sulfur chain in the sodium polysulfide. Common colors include pink, brownish red, and khaki blocks.
지금 연락하세요
Cyclohexane CAS# 110-82-7Cyclohexane is a normal alicyclic hydrocarbon, which is a ring shape composed of six carbon atoms, every of which is linked to two hydrogen atoms. It has two most important conformations: chair and boat, of which the chair conformation is the most stable. It is a colorless liquid with a pungent smell at room temperature and pressure. It is insoluble in water, however miscible with most natural solvents such as ethanol, ether, benzene, and acetone.
지금 연락하세요
Sodium Sulfide CAS#1313-82-2Product Description:  Sodium sulfide is the chemical compound with the system Na₂S, or greater many times its hydrate Na₂S·9H₂O. Both are colorless water-soluble salts that supply strongly alkaline solutions. When uncovered to moist air, Na₂S and its hydrates emit hydrogen sulfide, which smells like rotten eggs. Sodium sulfide, anhydrous is a yellow to brick pink crystalline mass or fused solid. If uncovered to moist air, it absorbs moisture from the air, and it is in charge to spontaneous heating and might also motive ignition of close by flamable material.
지금 연락하세요
H3PO4 CAS#7664-38-2Welcome to our detailed product page for Phosphoric Acid, also known as Orthophosphoric Acid, with the chemical formula H3PO4 and registration number CAS#7664-38-2. This industrial grade acid is the cornerstone of various industries, providing a range of applications from agriculture to food processing.
지금 연락하세요
Products Description of Benzalkonium Chloride CAS#63449-41-2Benzalkonium chloride is a cationic surfactant and a non-oxidizing fungicide. It has a broad-spectrum and highly effective bactericidal and algaecidal ability. It can effectively control the growth of algae and slime in water, and has good slime stripping effect and certain dispersion and penetration effects. It also has certain degreasing, deodorizing and corrosion inhibition effects. Benzalkonium chloride has low toxicity, no cumulative toxicity, is easily soluble in water, and is not affected by water hardness.
지금 연락하세요
Products Description of Benzalkonium chloride CAS#63449-41-2Benzalkonium chloride is a cationic surfactant and a non-oxidizing fungicide. It has a broad spectrum and high efficiency in killing bacteria and algae. It can effectively control the reproduction of bacteria and algae and the growth of slime in water. It has good slime stripping effect and certain dispersion and penetration effects. It also has certain degreasing, deodorizing and corrosion inhibition effects.
지금 연락하세요
Products Description of Benzalkonium Chloride CAS#63449-41-2Benzalkonium chloride is a cationic surfactant and a non-oxidizing fungicide. It has a broad spectrum and high efficiency in killing bacteria and algae. It can effectively control the reproduction of bacteria and algae and the growth of slime in water. It has good slime stripping effect and certain dispersion and penetration effects. It also has certain degreasing, deodorizing and corrosion inhibition effects.
지금 연락하세요
Products Description of CERIUM(III) CHLORIDE CAS#7790-86-5White crystalline particles Cerium trichloride is a colorless, deliquescent block crystal or powder. When exposed to humid air, it quickly absorbs water to form hydrates of uncertain composition.
지금 연락하세요
Products Description of K-CATALYST CAS#1318-93-0Montmorillonite, also known as microcrystalline kaolinite or collinite, is an aluminosilicate whose main component is octahedral montmorillonite particles. It was named after it was first discovered in Montmorillonite, France. . Montmorillonite is a very soft phyllosilicate mineral that forms microscopic crystals called clays when they precipitate out of aqueous solutions.
지금 연락하세요
Products Description of Tetrabutylammonium Iodide COA#311-28-4Tetrabutylammonium iodide (TBAI) is a commonly used phase transfer catalyst that can increase the reaction rate or effectively promote a variety of chemical reactions. This reagent can be used as an iodine source to generate the iodide required for the reaction in situ, avoiding the use of some unstable and expensive iodides.
지금 연락하세요
Products Description of 4-Methylmorpholine CAS#109-02-4N-methylmorpholine is an important organic chemical intermediate. It is an excellent solvent, emulsifier, corrosion inhibitor, polyurethane foam catalyst, and can also be used as a pesticide intermediate.
지금 연락하세요
Products Description of Boron Trifluoride Diethyl Etherate CAS#109-63-7Boron trifluoride is an important Lewis acid catalyst in organic synthesis and plays an important role in organic reactions (such as polymerization, hydrocarbonization, alkylation, isomerization, etc.). It is inconvenient to use trifluoride when it is in gaseous state. In order to adapt to the activity requirements of different reactions, according to the characteristics of trifluoride, it is often combined with polar oxygen- or nitrogen-containing compounds to convert it into a complex with strong stability.
지금 연락하세요
Products Description of 1-(4-Chlorophenyl)Piperazine Dihydrochloride CAS#38869-46-4Para-Chlorophenylpiperazine (pCPP) is a psychoactive drug of the phenylpiperazine class. It is relatively obscure, with limited human use, and produces slightly psychedelic effects.
지금 연락하세요
Products Description of Dibenzoylmethane CAS#120-46-71,3-diphenyl-1,3-propanedione is commonly known as dibenzoylmethane.
지금 연락하세요
Products Description of (Hexadecylamidopropyl)trimethylammonium chlorideCAS#51277-96-4White powder(hexadecylamidopropyl)trimethylammonium chloride Chemical Propertiesdensity 1.029[at 20℃]vapor pressure 0Pa at 20℃Water Solubility 203mg/L at 20.1℃LogP2.49 at 25℃EPA Substance Registry System1-Propanaminium, N,N,N-trimethyl-3-[(1-oxohexadecyl)amino]-, chloride (51277-96-4)Factory and Equipment ShowFast delivery timeInventory 2-3 working days New production 7-10 working days
지금 연락하세요
Products Description of 1-Ethylpiperazine CAS#5308-25-8N-Ethylpiperazine (EPA) is one of the piperazine derivatives. As a pharmaceutical intermediate and fine chemical, it is widely used in pharmaceutical and organic synthesis. It is mainly used to synthesize ethyl ciprofloxacin antibiotics. It is also used as a synthetic raw material for dyes and plant protection agents. It is also widely used in fungicides and surfactants.
지금 연락하세요
Relate News
Glycerin: A Versatile Compound with Numerous ApplicationsGlycerin, also known as glycerol, is a simple polyol compound with a sweet taste and syrupy texture. It is widely used in various industries, including cosmetics, pharmaceuticals, and food. Due to its unique properties, such as being hygroscopic (attracting water) and non-toxic, glycerin has become an indispensable ingredient in many products.Glycerin in CosmeticsMoisturizer: Glycerin is one of the most effective humectants, drawing moisture from the air and into the skin.
Breaking News: Glycerin Market Projected to Reach US$ 3.2 Billion by 2032The global glycerin market is experiencing significant growth, with IMARC Group's recent report predicting the market to reach US$ 3.2 Billion by 2032, exhibiting a CAGR of 4.9% during 2024-2032 .
In fact, many people are familiar with glucose. This is a very helpful nutrient to the human body. It can effectively enhance the body’s immunity, improve the ability to resist viruses, maintain the balance of intestinal flora, and effectively delay skin aging. To achieve the effect of lowering cholesterol, but if excessive intake can also lead to increased blood sugar.Glucose is a kind of monosaccharide that widely exists in nature. There are many functions and functions of glucose.
Industrialization of TrehaloseTrehalose is a stable non-reducing disaccharide consisting of two glucose molecules with an α, α, 1, 1-glycosidic bond. Trehalose was originally extracted from the ergot fungus of rye and was subsequently found to be widespread in natural flora, fauna and microorganisms, especially in fungi, algae, mosses and invertebrates. Trehalose is white crystal, a molecule of trehalose contains two molecules of crystal water, soluble in water, glacial acetic acid and hot ethanol, insoluble in ether, acetone.
Dimethyl Disulfide (DMDS) Industry Sees Growing Demand Amidst Industrial Expansion[City, State] – [Date] – The global dimethyl disulfide (DMDS) market is experiencing significant growth, driven by the increasing demand from various industries.
Introduction of Capsaicin PepperThe spicy ingredients contained in pepper fruit are capsaicin pepperoids, including: capsaicin pepper, dihydrocapsaicin pepper, nordihydrocapsaicin pepper, homocapsaicin pepper, homodihydrocapsaicin pepper I, homodihydrocapsaicin pepper II, Nonoyl vanillylamide, Decoyl vanillylamide, Capryl vanillylamide. Capsanthin includes Cryptoxanthin, Capsanthin, Capsorubin, Carotene; also contains vitamin C, citric acid, tartaric acid, malic acid, protein, minerals, etc. .
What is Cornmint Oil?Cornmint oil is a colorless or light yellow clear liquid. It has a special refreshing fragrance, which is pungent at the beginning and cool afterwards. After long-term storage, the color becomes darker. It is often used to repel mosquitoes and relieve physical fatigue.Legend has it that the original name of mint comes from Greek mythology. Pluto Hades fell in love with the beautiful Elf Mansi, and Pluto’s wife Persephane was very jealous.
Global Role of Ethylene GlycolThe global supply chain is intricately linked with the production and distribution of ethylene glycol, also known as mono ethylene glycol (MEG) or simply EG, with the chemical formula C2H6O2 and CAS number 107-21-1 . This clear, viscous liquid is a critical component in various industries, from automotive to textiles, and is commonly recognized for its use in glycol antifreeze solutions .Ethylene glycol is predominantly utilized in the manufacturing of polyester and polyurethane plastics, which are essential in the textile industry.
New Use of Poly-L-lactic Acid as Shape Memory MaterialBackground techniqueBiopolymer is an important medical polymer material with good biodischarge and bioabsorbability advantages. It has been widely used in outdoor fixation, tissue engineering stents, operation lines, drug control, etc. Polylactic acid is usually synthesized by the ring polymerization method of lactide. According to the difference of optical ring-opening polymerization, the lactide properties are divided into D-lactide properties, L-lactide properties and DL-lactide properties.
Hydroxyethylidene diphosphonic acid characteristics:HEDP(Hydroxyethylidene Diphosphonic Acid) is an organic phosphoric acid and corrosion inhibitor, which can form stable complexing agent with iron, copper, zinc and other metal ions, and can dissolve oxides on the metal surface. HEDP can still play a good role in corrosion and scale inhibition at 250°C, is still very stable at high pH values, not easy to be hydrolyzed, and not easy to decompose under general light and heat conditions.
x

성공적으로 제출되었습니다

최대한 빨리 연락드리겠습니다.

닫다